"Protection begins with Detection" 

 

 

 

Buy online at Arrow-Tech, Inc's Online Store

Electronic Dosimeter Readers

LDM 210 - RS 232 Dosimeter Reader

PDF spec sheet LDM 210                    LDM 210 & 220 User Manual PDF

LDM 220 - USB Dosimeter Reader

PDF spec sheet LDM 220

LDM 230 - PC card Dosimeter Reader

PDF spec sheet LDM 230

LDM 210 - RS 232 Dosimeter Reader

Compact - Non contact  dosimeter reader - low cost

Compatible with the DMC 2000 and SOR family

LDM 210 PDF spec sheet..

BUY NOW>>

 

LDM 220 - USB Dosimeter Reader

Compact - Non contact  dosimeter reader - low cost

Compatible with the DMC 2000 and SOR family

LDM 220 PDF spec sheet..

LDM 230 -  PC Card (PCMCIA)

PC Card type II extended

Compatible with a Notebook and a Pocket PC

LDM 230 PDF spec sheet..

The LDM 210& LDM 220 & 230 reader operates using software packages installed on the computer (PC) and communicates with the dosimeters of the DMC 2000 and SOR family in pass-by data exchange mode.

  • Compact

  • Non contact dosimeter reader

  • Low Cost

LDM 230 with a Notebook    >:>

  • No directional alignment required
  • Indicator lamps for operation and access control
  • Manageable digital inputs/outputs
  • DSP based digital process
  • Compatible with DMC 2000 and SOR family
  • Compatible with software packages:
  •      DosiMed
  •      DosiFast
  •      DosiMass

LDM 230

with a Pocket PC  >>

Operational Characteristics

Associated to the DosiMed of DosiFast software, the LDM 210, 220 & 230 reader is used as interface to activate a dosimeter ( to switch in counting mode) or to deactivate it (to switch in pause mode).

Associated to the DosiMass software, it is used as interface to read and write the internal data of the dosimeter.

 

 

Description LDM 210

Description LDM 220

  • Two-color electroluminescent diode used as ON/OFF and data exchange indicator lamp.
  • Two-color electroluminescent diode for READY/BUSY indication
  • Two-color electroluminescent diode for ACCESS/NO ACCESS indication
  • SUBD9 - pin female connector for RS 232 data link
  • JACK connector 5.5 mm x 2.1 mm for DC power supply (RS 232)
  • 2 HE10, 2 x 7 - pin male connectors for 4 digital inputs and 4 digital outputs
  • Software downloadable and saved in flash
  • Two-color electroluminescent diode used as ON/OFF and data exchange indicator lamp.
  • Two-color electroluminescent diode for READY/BUSY indication
  • Two-color electroluminescent diode for ACCESS/NO ACCESS indication
  • SUBD9 - pin female connector for RS 232 data
  • 2 HE10, 2 x 7 - pin male connectors for digital of 4 inputs and 4 digital outputs
  • software downloadable and saved in flash

 

 

Electrical characteristics

  • Universal power supply supplied
  • LDM 220 - Self powered
  • Input: 90 to 265 VAC - 47-63 Hz
  • Output: 9 V DC
  • Delivered with interchangeable US and Europe mains plug
  • Consumption: typical 100 mA under 9V
  • Options ( on request, please consult us(:
  • Power supply by 2 AAA 1.5 batteries
  • Autonomy on batteries: Typical 10 hours
  • LDM 230, 5 V  PC Card
  • EMC: complies with and exceeds CE standards

LDM 210 with cable and power supply

LDM 220 USB reader

BUY NOW>>

Mechanical characteristics 210

Mechanical characteristics 220

Mechanical characteristics 230

  • Length: 110 mm
  • Width: 65 mm
  • Thickness: 28 mm
  • weight:  100 g
  • Length: 70 mm
  • width: 80 mm
  • thickness: 32 mm
  • weight: 120 g
  • BUY NOW>>
  • Length: 119 mm
  • Width: 54 mm
  • Thickness:15 mm
  • weight:  47 g

Environmental characteristics

  • Operating temperature: 0 to + 50 C
  • Storage temperature: -10 C to + 60 C
  • Humidity:  90% RH (without condensation)

Communication with dosimeters

  • Short range high frequency bidirectionnal data exchange
  • Nominal range: between 20 and 30 cm
  • reduced range setting: between 5 and 20 cm

 

Send mail to dleas@arrowtechinc.com    with questions or comments about this site.
Last modified:  03/10/08